I was first introduced to Kumihimo (Japanese cord braiding) by Becka Rahn of the Minnesota Textile Center. She was teaching shoppers at Craftravaganza in St. Paul, Minnesota. I was stuck in my booth for the show so I couldn’t try it there, the idea stayed with me. (Shameless plug: Isette will again be at Craftstravaganza Saturday, May 10th. Come check it out, it’s a cool show!)
A very basic explanation of kumihimo: you move threads around a disk in a specific repeating pattern that causes the threads to overlap and make a cord. You need a minimum of 8 strands, and from what I can tell, there is no maximum. There are tons of tutorials on-line, and it’s a very cheap hobby to try out!
Becka taught people how to braid on homemade cardboard disks – it seemed quite reasonable to make one on my laser. After researching kumihimo on-line, I learned 3 things:
Fact 1: Modern of kumihimo disks are based on the tool called a Marudai, which make braided cords and is stool like, not hand held. The other big difference is that it is smooth on the edge – no individual slots for threads.
Fact 2: Most commercially available kumihimo disks have 32 slots, and are round. Square disks are also available, marketed to make square or flat braids.
Fact 3: 32 strands is an artificial limit to the braid, and square / flat braids can also be made on a round disk – the square ones just make the threads and repetition easier to keep track of.
So, having never actually made a kumihimo cord in my life, I set out to make a versatile disk with more options than the 32 slot version. (Ah, hubris.) That, and I didn’t want to simply copy what you could go to your local craft store and buy. Overall, I’d call it a success – I made some beautiful braids.
Design change 1: squarish design – more like a puffy cube. It still can rotate in the hand, but has the “corners” marked directionally to keep track for square/flat designs. Verdict: win. The disk worked well for both round and flat braids, and could rotate in my grip.
Design change 2: Go big – 48 strands can go on the disk (I read somewhere that I can’t find now that kumihimo thread slots should increase 4 at a time). Verdict: toss-up. It basically made this disk impossible for beginners – almost all the tutorials on-line are for 32 slot disks. But it is not hard to extrapolate the data if you are not depending on the numbers to tell you where to move your thread to, but instead use visual placement. The bonus is that it allows for larger, more complex braids.
Design change 3: With the go big idea, the original disk was roughly 6.5 inches across. Marudai are quite large, so I figured with a larger diameter, it might be easier to work with. Verdict: loss. Part of keeping the tension on the braid with the handheld disk is pinching the center of the circle from the top and the bottom – there was no way my hands could reach that. Even the second version, 5 inches across, was a bit to big for comfort, and I don’t have dainty hands. I’ll make the next one 4.5 inches.
The laser cutter is a great way to make kumihimo disks, and quite versatile. It is relatively simply to design one with more or less slots, and the durability of the acrylic allows for more handling than a homemade one from cardboard. The acrylic disk is more rigid than the foam store-bought versions, and there isn’t as much “grab” to your thread. This makes it more important to watch the tension while braiding so it doesn’t get sloppy. It doesn’t take long to get a rhythm going though, and it can be quite fun!
If you’d like to try your hand at your own kumihimo, here are some helpful hints:
– Get a pattern for your own disk, which you can easily cut from cardboard.
– Check out You-tube videos to see the movement of the braiding – sometimes the written instructions can be a bit daunting. Start with the 8 strand kumihimo and work your way up.
– The color picker I used for the 8 strand cord is great to see how the colors you pick will work!
– Craft Design On-line has a great kumihimo braid gallery, and is where I got the patterns for the 16 strand and the Mitake style cord. They allow you to customize the strands with your own colors! I also like they give instructions for the marudai as well as the disk.
