I’ve talked about this particular kind of laserable magnet before, but for this week’s project, I took the same magnet material and determined whether I could use it as a replacement for the strip of magnet material I normally use for my set of dialog boxes.
I currently use a 1/2″ strip magnet stored in rolls for this type of product, and while it does the job well, I appreciated the reduced overall thickness and cleaner lines I discovered during the shaped magnets project. But there were three other things to consider before I could revamp the Earthbound and Final Fantasy dialog boxes with the new magnet type: efficacy, material cost, and processing time.
Since we’re talking about magnets, it’s important to make sure they can hold themselves (and hopefully several other things) securely against the surface you’ve stuck them to. One example of a magnet that doesn’t hold up is the inkjet magnet material I used for some full color Megaman Robot Master icons I made a while back. While they looked great, just one of those magnets couldn’t hold a single thing beyond itself—the magnet simply wasn’t powerful enough. (Thankfully, those magnets were at least strong enough to hold themselves up.) In this case, the laser cut magnet material, when cut to the full size of the Earthbound dialog box, was able to match the two inches of strip magnet I use in holding power, so I was glad not to have to worry about that.
While the laserable magnet ended up costing more per magnet than the strip magnets I use, I wasn’t interested in adjusting prices to accommodate this change. Because of this, the convenience of laser cutting perfectly shaped magnets would have to outweigh that additional cost.
Unfortunately, while it was certainly more convenient to tell the laser to cut hundreds of magnets rather than doing it by hand with a precision blade, the introduced clean-up step was so time consuming and unpleasant that there was no way this was going to be a viable upgrade without significantly increasing the price of the product, which wasn’t on the table.
The problem lies in the way this magnet material dissolves when cut away with the laser. It leaves a fine gritty dust of magnet material that was easy enough to clean off of the black acrylic used in the aforementioned shaped magnet project. With the white base acrylic used in both the Earthbound and Final Fantasy dialog boxes, though, this grainy magnet soot was almost impossible to clean away without damaging the surface of the dialog box. Even with isopropyl (and perhaps in part because of isopropyl) I was unable to clean the finished pieces without either staining the white exposed acrylic or seriously scuffing the black cap layer.
My first cut tests were done with the magnet already affixed to the acrylic, but I even considered cutting the magnets separately and then affixing them to the acrylic pieces after both were clean. This added yet another step to the process and, sadly, didn’t mitigate the unreal amount of time spent trying to wash away all of the grime produced when processing the material.
This laserable adhesive magnet sheet really neat product, and it allows me to create some really neat special magnetic pieces, but the time and care that goes into making sure the clean-up process doesn’t damage the final piece means that I just can’t consider them for the standard line of dialog box magnets at Pixelaser. I’ll be keeping an eye out for more laserable magnet options in the future (and if you know of any, please do share!) but for now, our stalwart magnet strips will continue to do the heavy lifting. Sweet fresh feel!